HWID Spoofing (ASUS)

How to Spoof HWID

1. Partition Setup

The partition must be created on your main disk. This step is mainly made for ASUS users.

1. After creating the partition, drag the files into the newly created partition.

2. After doing that, go into the BIOS.

3. Go to the boot tab, and you should see your boot list. Make sure UEFI OS is #1.

ASUS Motherboards

1. Go to Boot > Secure Boot > OS Type [Windows] & Secure Boot mode set to Custom (Secure boot mode can be found under "Boot configuration") (Don't have it? That's fine!)

2. Ensure all Default keys are installed. If it shows "0" at all, click "Install Default Keys".

3. Now open "KEK Management"

4. Choose the "Append key" option

5. Press "No" to load it from a file on external media

6. Choose the partition file system (Go through the options until you find demios.der)

7. Choose the "demios.der" file

8. Select the file format as "Public Key Certificate."

9. Finally, press "Yes" to append KEK with content from the .der file

10. You should see a "Success" message if you did it correctly

11. Now do the same for "DB Management", the same thing as "KEK Management"

12. Now, save and exit the BIOS

All Motherboards

1. Go to Secure Boot and enter the key management tab.

1. Now find authorized signatures.

1. Click on append, then press no on load factory default.

1. You should be able to see around 4 options, you'll want to go through each one to find demios.der.

1. When u find demios.der select it and press Enter.

1. Press the public key certificate.

1. Press Yes.

1. You should see success; if not, press Enter on your keyboard and you should see it.

2. Now save and exit the BIOS. You can do this by pressing F10.

When booting into your PC, you should see this screen or similar.

1. Don't press anything until you boot into Windows.